Skip to main content

Basic Guide To Setting Up A Backyard Pond

Adding a feature of pond water into your backyard can really spice things up and transform an ordinary looking backyard into a serene living area. For backyards that are a little bit on the duller side and lack a good centerpiece or focal point, it can be quite a good idea to add a pond to fill the void. It’s not very hard to build your very own pond in your backyard and there are plenty of kits available on the market today. In a day, everyone can set up their very own backyard pond. These can be very inexpensive to install and are much more cost-effective than hiring for you a professional landscaping service. The downside of these, however, is that they do not seem to look as exclusive or as luxurious as custom-built sets.Have a look at Backyard Pond Construction to get more info on this.

You can still go on the do it yourself route, however, and build a backyard pond that matches your personal taste without having to resort to paying for it a high-priced contractor. There are only a few things you need to learn before you can create your own pond in the backyard.

First off let’s go over the things you need in your backyard to accomplish this.

  1. Seagull Liner
  2. Decorative drilling
  3. Box pump
  4. Piping
  5. Grow Indoor Plants
  6. Decorative underfloor lighting
  7. Pond base furniture fabric

So the seven things mentioned above are essentially what you need to create your very own backyard pond by yourself. Now let’s go over how to use each of those things to build the ideal pond for your backyard.

After determining the size of the pond you need to dig up the area where the pond is going to go. Be sure to dig your pond to the size, shape and depth you want. Then line this excavated site to the lining fabric of the base of the pond. The purpose of this is to help prevent any jagged rocks underneath from damaging the pond liner. You need to place the pond liner on top of it once the fabric has been laid down. Make sure the pond liner is slack, and it should also have some loose slacks on the ground level.

The next step is to place your irrigation pump inside the irrigation somewhere. A good idea is typically to position it near the edge of the pond. If you wish to include a water fountain feature in the pond, install all the necessary tubing. Next, the decorative stones must be used and your pond decorated accordingly. Try putting the larger stones on the bottom of the pond so it sits on the flaps and covers any liner that might be visible. To make the pond look vibrant at night, using the accented ground lighting.

You only have to fill your pond with water at this point, and then include any decorative plants you want. If you wanted to add water plants, then it is suggested that you keep them in pots and put the whole pots in the pond. You can also put live fish into this pond too.