Skip to main content

Roofing Works and Services

Installation and assembly of roof covering
The construction of the roof is sometimes referred to as “roofing pie” and not without purpose – in fact, any rooftop consists of many elements that provide strong protection for housing, sort of laminating on each other. Each layer of coating construction performs its own designated function, be it moisture-proofing, noise insulation, or heat loss protection. In order to ensure the effectiveness of their functions, it is important to pay careful attention to the sequence of coatings during roof installation. The basic elements are: By clicking here we get info about tampa

Pellicle for damp-proof membrane and vapor sealing;
Lagging-keeping warmth;
Anti-wind protection;
Material for roof-boarding;
Arrangement with ventilation;
Other elements.
The construction of the roof implies the development of such a “pie” which is covered with cladding or thatching at the final level, and painted if necessary. With due regard to climate characteristics, building designation and architectural peculiarities, roof structure, material selection to obtain the desired hermeticity and durability is carried out (flat or pitched). In addition, the degree of loading imposed by snow, winding and other atmospheric phenomena should be considered.
Other roofing practices require different methods, equipment and sufficient expertise of installers for the assembly of flat-deck and inclined roofs. Let’s take a thorough look at the specificities of various roofs and concentrate on such essential operational aspects as the repair, maintenance and installation of rainwater systems.
Characteristics of installing flat roofs
Flat roofs with a slope of less than 2.5 degrees are arranged using reel-fed materials or polymeric membranes that are fusion-bonded. These materials are specifically designed for the terraced-roof alternative, tailored in terms of their profile, providing them with optimum protection against weathering, ultraviolet exposure, etc. By welding sheets of roll composition roofing using hot air, assembling rolled materials is accomplished. Different mastics allow the perfect impermeability of the waterproof membrane to be achieved.
Membranous rooftop assembly is done by connecting the fabric to the screed of the roofing; membrane sheets are fastened by hot-air welding technique between each other. Extruded heat retainers, rigid insulants from mineral wool and extended plastics are used for the winterization of flat-deck roofs. The choice of installation technologies and insulation is determined by the roofing type and the strength of loads on it.